General Information
Sunrise07:38
Sunset18:06
Temp. Outside17,0 °C
Temp. Inside22,8 °C

Usages for today
Gas0,61 m3
Power8,3 kWh
Water210 L

HA Statistics
Devices 292
Device values 1723

Hot Projects

Read about them
on my web log:
Smart meter
Opentherm
Ethernet Doorbell
Audio/Video
Mantis CNC Mill
DIY Wireless Sensors
ZigBee
Arduino

Last pages added:

Opentherm Gateway
Smart meter
Nemef Radaris Evolution
Audio Video

Gas usage

Info  How  Charts

The smart meter that was installed in our house in September 2012, sends the gas consumption to my system. The most precise and convenient way of monitoring gas usage!
 

Remeha boiler

My Remeha boiler (Calenta model) is being monitored by using the Remeha Recom 'protocol' and a cable connected to the boiler. Whenever there are problems with the Calenta, I'll be the first to know cause problems will trigger an SMS to be sent to my cell phone. More information can be found here
Remeha Calenta

Status Standby (0)
Sub Status Standby
Blocking No blocking
Locking No locking
Flow temp 54.00 °C
Return temp 53.80 °C
Water pressure 1.8 bar
Power 0 %
 
 

Temperature and Humiditiy

Charts

Sensors located in the house are used to gather information about Temperature and Humidity and create charts.
Temp/Hum Sensor
LocationWhatValueUnit
BathroomHumidity 61RH
BathroomTemperature 20.2ºC
EntranceHumidity 53RH
EntranceTemperature 21.9ºC
GarageHumidity 42RH
GarageTemperature 19.5ºC
GreenhouseHumidity 88RH
GreenhouseTemperature 20.3ºC
LivingTemperature 22.0ºC
N/A, DownstairsTemperature 24.6ºC
N/A, UpstairsTemperature 19.2ºC
OfficeCold Temperature-1 21.25ºC
OfficeDifference-1 0.12ºC
OfficeHot Temperature-1 21.37ºC
OfficeHumidity 40RH
OfficeTemperature 25.4ºC
OutsideAvg Temperature Yesterday 10.7ºC
OutsideHumidity 56RH
OutsideTemperature 17.0ºC
Room EstherHumidity 44RH
Room EstherTemperature 22.2ºC
Room ParentsHumidity 53RH
Room ParentsTemperature 21.6ºC
Room RemcoHumidity 68RH
Room RemcoTemperature 21.4ºC
SculleryTemperature 22.10ºC
SculleryTemperature 22.50ºC
SculleryTemperature 21.30ºC
SculleryTemperature 21.30ºC
SculleryTemperature 21.30ºC
SculleryTemperature 21.10ºC
SculleryTemperature 21.10ºC
Scullery, Central HeatingTemperature 24.60ºC
Scullery, Central HeatingTemperature 24.30ºC
Under the stairsHumidity 46RH
Under the stairsTemperature 22.8ºC
 

Dusk/Dawn

Light/dark sensors are used to collect information about Ligtht and darkness in several places in the house.
D/LLocationValueSince
Domotica system, Light intensity yesterday 83 15-2-2014 23:59:00
Outsidelight 2-7-2013 5:50:29
Living 86 Today 10:19:21
Outside, Front, MBTX Light sensor 694 Today 10:18:01
 

Events

Below you can see the last 200 Events in our house.
TimeMessage
Today 9:57:58 Bathroom, no motion
Today 9:25:08 Bathroom, motion
Today 9:24:38 Central Heating Operating mode Idle
Today 9:23:41 Central Heating Operating mode DHW Mode
Today 9:22:02 Bathroom, no motion
Today 8:45:27 Scullery, no motion
Today 8:44:59 Garage, no motion
Today 8:39:23 Bathroom, motion
Today 8:35:07 Living, no motion
Today 8:34:08 Bathroom, no motion
Today 8:32:09 Garage, Spotlight off
Today 8:32:09 Garage, no motion
Today 8:32:03 Garage, Outside door closed
Today 8:31:41 Kitchen, no motion
Today 8:31:35 Scullery, Ceiling Light off
Today 8:31:35 Scullery, no motion
Today 8:31:30 Garage, Outside door open
Today 8:31:14 Office, no motion
Today 8:31:13 Garage, Inside door closed
Today 8:31:08 Garage, Spotlight on
 

GPS tracking

The location of my cell phone is being monitored by tracking the GPS location. Below you can see the last known position of my cell phone drawn on Google Maps.
 

Weather

Weather forecast
Rheden
 

Contact, questions?

For questions or comments or any other reason related to this website or Home Automation, send an email to the address below:
Another option is to leave a message in my Guestbook and I'll contact you.

Power usage

How  Charts

The smart meter that was installed in our house in September 2012, sends the power usage to my system. Every 10 seconds the total power usage (among other things) is being updated.
 

Lux Sensor (ZigBee)

A DIY wireless lux sensor is used to measure light intensity (lux). This sensor is made of a JeeNode and a XBee module and is one of the first parts of my ZigBee based WSN that i am building.
 

Web enabled LED Bar

Leave a message on my LED Bar and watch it being displayed by my Axis 207 IP Camera

Web enabled LED Bar

 

Motion Detection

Motion sensors provide information about where nd when there is motion detected in several places.
0/1LocationValueSince
Officeunknown 20-4-2015 9:55:18
Stairsno motion Today 7:57:45
Livingunknown 20-4-2015 9:55:18
Garageno motion Today 8:33:40
Passageno motion Today 7:57:44
Bathroomno motion Today 9:46:25
Room Estherno motion Yesterday 12:44:25
Room Remcono motion Today 7:57:58
Entranceno motion Today 7:43:07
Sculleryno motion Today 8:33:17
Officeno motion Today 7:42:32
Laundryno motion Today 7:42:47
Livingno motion 27-4-2015 23:02:22
Kitchenno motion Today 8:31:41
Living, Frontmotion 4-4-2016 3:20:46
 

Door images

A 3 megapixel professional security camera saves an image every time someone rings at our doorbell or opens the mailbox. In case of the doorbell, this image is also sent to my HTC mobile phone by email. In the livingroom, on our Touch screen, a popup will appear with a live stream of the security camera.
Last image taken at: 25-5-2016 16:14:33
 

Door image history: previous 9 images

Door image taken at 24-5-2016 18:39:26
Door image taken at 24-5-2016 18:38:56
Door image taken at 24-5-2016 13:13:32
Door image taken at 23-5-2016 18:41:07
Door image taken at 20-5-2016 17:07:42
Door image taken at 20-5-2016 17:07:39
Door image taken at 19-5-2016 17:50:34
Door image taken at 19-5-2016 17:49:15
Door image taken at 18-5-2016 17:56:28
 

Batteries

Here an overview is listed of all the sensors that are used and that are capable of reporting their battery status. This is very useful to see if there are sensors that need a new battery.
D/LLocationValueSince
Kitchen, Lux Radio 3098 Today 10:03:47
Kitchen, Motion Radio 3305 Today 7:08:52
Living, Motion Radio 3113 27-4-2015 23:22:15
Living, ThermostatOk 9-4-2015 20:53:52
Room Remco, ThermostatOk 24-5-2014 22:27:39
Living, ThermostatLow 6-5-2016 8:55:00
Room Parents, ThermostatOk 26-12-2013 14:16:46
Room Esther, ThermostatOk 24-5-2014 22:25:39
Bathroom, ThermostatOk 7-10-2011 21:41:05
Office, ThermostatOk 26-12-2013 14:16:46
Office, ThermostatLow 2-4-2016 10:04:41
Entrance, Controller 1Ok 24-5-2016 21:21:16
Greenhouse, TemperatureEmpty 16-7-2015 13:33:33
Outside, TemperatureOk 29-8-2013 20:31:52
Under the stairs, TemperatureOk 11-1-2015 13:56:50
Room Parents, TemperatureOk 2-10-2015 21:22:57
Office, TemperatureOk 2-10-2015 21:23:33
Entrance, TemperatureEmpty 27-2-2016 16:01:20
Garage, TemperatureEmpty 10-3-2016 0:10:34
Room Remco, TemperatureOk 2-10-2015 21:24:04
Room Esther, TemperatureOk 9-4-2015 20:58:17
Bathroom, TemperatureEmpty 18-12-2015 21:49:35
Passage, Smoke DetectorOk 7-10-2015 13:07:50
Entrance, Smoke DetectorOk 27-4-2015 10:49:07
Kitchen, Smoke DetectorOk 3-1-2016 14:42:41
Office, Smoke DetectorOk 14-3-2015 10:12:31
Kitchen, Pressure Radio 2869 3-5-2016 1:52:54
Kitchen, DoorOk 9-4-2015 20:19:46
Office, TestLow 20-11-2015 17:22:06
Office, Test auxOk 5-7-2013 23:38:00
Garage, Outside DoorOk 7-10-2015 12:53:24
Entrance, MotionOk 11-1-2015 13:31:29
Office, MotionOk 16-9-2014 20:23:29
Garage, MotionLow 17-1-2016 8:27:10
Room Remco, MotionOk 1-1-2013 15:50:37
Stairs, MotionOk 26-12-2013 16:09:27
Room Esther, MotionOk 3-9-2014 20:40:53
Passage, MotionOk 26-12-2013 15:44:16
Bathroom, MotionOk 26-12-2013 15:54:45
Laundry, MotionLow 3-2-2016 1:58:58
Unknown, MotionOk 24-5-2014 22:05:19
Unknown, MotionOk 11-1-2015 13:21:20
Unknown, MotionOk 26-12-2013 13:18:23
Unknown, MotionOk 24-12-2014 20:25:56
Living, Back, MotionOk 29-8-2013 20:43:01
Scullery, Back doorOk 7-10-2015 13:01:46
Office, Desk, Test-2Ok 5-7-2013 23:38:00
Office, DoorOk 2-10-2015 21:17:35
Garden House, DoorOk 5-7-2013 23:38:00
Living, Front, Motion Radio 2906 4-4-2016 3:20:47
Entrance, Front doorOk 2-4-2014 19:36:12
Garage, Inside doorOk 7-10-2015 13:03:42
Garage, Outside DoorOk 7-10-2015 12:53:20
Living, SchuifpuiOk 16-8-2008 15:29:47
Room Remco, WindowOk 9-9-2015 12:25:44
Room Esther, WindowLow 19-2-2016 16:45:16
Bathroom, WindowOk 8-3-2015 14:55:42
Room Parents, WindowLow 30-11-2015 16:34:53
 

Roller shutters

A total of 12 Roller shutters suited with Somfy RTS motors are controlled by my system. Part of those shutters are being controlled automatically based on light sensors, inside temperatures to improve the usability of these roller shutters.
LocationValueSince
Living, Roller ShutterUp Today 5:25:03
Living, Roller Shutter frontUp Today 5:25:02
Living, Roller Shutter backUp Today 5:25:03
Room Remco, Roller ShutterDown 22-5-2016 21:00:01
Room Parents, Roller ShutterUp 8-5-2016 21:50:12
Office, Roller Shutter sideUp Today 5:25:05
Office, Roller Shutter smallUp Today 5:25:06
Office, Roller Shutter largeUp Today 5:25:05
Kitchen, Roller ShutterUp Today 5:25:04
Living, Roller Shutter garageUp Today 5:25:02
Room Esther, Roller ShutterDown 19-5-2016 22:27:20
Bathroom, Roller ShutterUp Today 5:25:06
 

Current Power usage

How  Charts

A very nice feature of our smart meter is that it also sends detailed information about the current power usage to my system - every 10 seconds.
 

Pressure Sensor (ZigBee)

How  

Since February 2010 a wireless pressure sensor is used to measure the pressure. This sensor is a DIY project where i combined an Arduino-like JeeNode  and XBee modules  to create my first self made, battery powered sensor.
 

User Interfaces

More  

Just like the rest of the software of my Domotica system, i also created my own User Interfaces: a Touchscreen, a Philips Pronto TSU9600 and a Apple iPod Touch can all be used to control our house. And with this website of course :-)
Touchscreen Pronto TSU9600
iPod Touch Website

 

Cold water usage

How  Charts

An Alaxa water meter and a RFXPulse sensor is used to monitor cold water usage.
 

Hot water usage

How  Charts

An Alaxa water meter, 1-Wire counter and a HA7Net are used to monitor hot water usage.

 

Doors and Windows

Visonic MCT-302 and KAKU door sensors are used to provide information about opening and closing of doors and windows.
Door/Window Sensor
0/1LocationValueSince
Garage, Fridge dooropen 20-4-2013 8:01:29
Scullery, Back doorclosed Today 6:43:43
Office, Dooropen Today 6:22:09
Entrance, Doorclosed Today 7:04:39
Living, Doorclosed 2-1-2016 14:07:37
Kitchen, Dooropen Today 7:39:56
Garden House, Doorclosed 22-5-2016 12:54:32
Garage, Inside doorclosed Today 8:31:13
Garage, Outside doorclosed Today 8:32:03
Office, Testopen 5-5-2016 15:20:54
Room Remco, Windowclosed 14-5-2016 18:40:18
Bathroom, Windowopen Yesterday 20:27:55
Room Esther, Windowopen 21-4-2016 11:42:09
Room Parents, Windowopen 25-5-2016 21:29:32
 

Power usage Devices

Plugwise Circles are used to monitor Device-specific power usage.
Plugwise uploader
0/1LocationValueSince
Meter cabinet, Smart meter 0.000 W Today 10:00:26
Office, Server LAN DSL 1.913 W Today 10:19:19
Garage, Fridge 1.276 W Today 7:24:12
Garage, Freezer 0.485 W Today 7:18:44
Kitchen, Microwave Oven 1.328 W Today 7:18:54
Scullery, Floor pump 0.000 W Today 7:18:54
Scullery, Broken 0.000 W 14-4-2012 12:52:17
Office, Camera, LEDBar 0.000 W Today 8:17:18
Laundry, Washmachine 0.000 W Today 7:18:54
Garage, Door Opener 0.000 W 26-2-2016 17:42:31
Laundry, Washdryer 1.577 W Today 7:16:29
Kitchen, Dishwasher 0.227 W Today 8:18:59
Kitchen, Fridge 0.179 W Today 6:40:02